Several different definitions of ‘net-zero’ or ‘climate-neutral’ buildings have arisen and are causing confusion. Different approaches quantify the greenhouse gas (GHG) emissions of buildings over their life-cycle. A typology is proposed based on distinctions between absolute and net-zero-emission buildings in relation to operational and full life-cycle approaches. Besides the absolute zero-emission approach, three different net-zero-emission approaches are: (1) a net-balance approach, which includes credits caused by potentially avoided emissions beyond the system boundary provided by exported energy; (2) an offsetting approach, based on the purchase of CO2 certificates; and (3) a technical approach, based on negative-emission technologies. The declaration of the approach chosen will provide clarity when discussing (net/absolute)-zero emission or climate-neutral buildings.
The use of suitable terms, definitions, system boundaries as well as calculation and assessment rules is a prerequisite for credibility and transparency. Legal requirements for limiting GHG emissions from buildings and their fulfilment should therefore be formulated in a way that is understandable by both industry professionals and stakeholders with clear rules for documentation and the provision of evidence. This is particularly important for the proof of the political goal to create a climate-neutral building stock. A typology of (net-) zero building approaches is presented that explains their level of ambition, fosters transparency, and reduces misperceptions and misunderstandings.
Various reports have been published on the need to limit global warming in the interests of preserving the natural resources of humanity (e.g.IPCC 2018a). The 2015 Paris Agreement requires countries to commit to keep the temperature increase significantly <2°C (UN 2015). However, clarity is needed for the definitions of suitable measurement, reference values, specific target setting and mitigation actions for greenhouse gas (GHG) emissions. A wide variety of terms exist to formulate this goal of keeping within a 1.5–2.0°C rise, but they lack clarity, offer room for interpretation and lack clear references to specific basic principles, system boundaries, as well as calculation and assessment rules. This creates uncertainty and risk. Unclear terms and definitions in combination with a broad scope for interpretation undermine transparency and credibility.
How one determines the influences and impacts on the climate or its change raises several initial questions. Different variables may qualify to monitor the development to stay below the 2.0 or 1.5°C target:
While (a) and (b) can be measured, values for (c) to (e) are usually calculated. It is important to know whether either only CO2 or all GHG emissions are taken into account. There are cases in which CO2 neutrality is achieved without this also being the case for all GHGs (climate neutrality). This fact shows the high importance of transparent calculation and modelling rules and system boundary.
A transparent process can ascertain the variety of emission sources and their climate impacts. The extent of the following sources needs to be taken into account:
The public debate is informed by the use of a diversity of terms; some are clearly explained and defined, but others not. The variety of terms in combination with a lack of clarity or transparency undermines the acceptance, trust and credibility of environmental assessments of buildings in general. Table 1 shows examples of terms used by companies, public authorities and organisations applied on buildings, neighbourhoods and districts, institutional, regional or national building stocks (operated by private or public building owners).
|Climate change||Greenhouse gas (GHG) emissions||Carbon|
|Climate friendly||CO2 neutral||Carbon neutral|
|Climate neutral||GHG neutral|
|Climate positive||Zero GHG emissions|
|Below 2°C compatible|
The terms using ‘neutral’ and ‘zero’ in Table 1 may be combined with ‘nearly’ to indicate the proximity to the target without defining it exactly or with ‘net’ in case GHG emissions are determined using a kind of balancing approach.1 The addition ‘net’ is thus the alternative to ‘absolute’ neutrality or ‘absolute’ zero emissions.
The question about the appropriate definition of a ‘zero’ and the level and extent to which compensation measures are part of such a definition is considered important.
The aim of this paper is to offer a typology of terms related to the life-cycle-based GHG emissions of buildings and, in particular, their zero and net-zero levels. This typology characterises current approaches based on their terms, definitions, calculation and modelling rules as well as options for compensations. The intention is to increase the transparency and understanding and thus the credibility of current approaches. The main questions are:
The typology offered here is based on the authors’ experiences in international (ISO TC 59 and SC 172); and European standardisation work (CEN TC 3503); in international research projects (e.g. IEA EBC Annex 574 and IEA EBC Annex 725), as well as national harmonisation and consensus-finding processes.
The paper is structured as follows. After a short description of a building and its life-cycle as object of investigation, the principles and steps of a GHG emission balance are explained. This is followed by the development of a systematic approach to terms and system boundaries for (net-) zero-emission approaches. A proposal is then presented for communicating the climate-protection goals and approaches, including the latest developments in international standardisation.
In view of calculating, analysing, assessing and finally reducing the life-cycle-based GHG emissions of an individual building, the building and its life-cycle needs to be modelled, calculation and modelling rules need to be formulated, and further questions need to be answered.
It is useful and common practice to define the type and pattern of use of a building based on a description of a functional equivalent, to check the completeness of the building model and to structure the building’s life-cycle. This is usually performed by defining life-cycle stages and then attributing specific information to each stage, using information modules. This structure is proposed by the relevant international and European standards (CEN 2011). An important distinction can be made between building-related parts, including production, construction, maintenance and replacement, and end of life (embodied) and operation-related parts of the life-cycle (Figure 1).
The GHG emissions of individual building can be structured according to the two parts proposed in Figure 1:
Thus, building-related GHG emissions can be structured as follows:
To achieve climate-neutral buildings in line with strategies for a fulfilment of the Paris Agreement, the GHG emissions caused during the life-cycle of a building should be zero. Today, zero direct GHG emissions during the operation of buildings and thus absolute zero operational GHG emissions are feasible using renewable energy. Today, GHG are still emitted in the supply chains of the renewable energies as well as in construction material and building element manufacture. Thus, zero life-cycle-based GHG-emission buildings are yet difficult to achieve. Some kind of GHG emission reductions need to be included in the GHG emissions assessment of buildings (Figure 2). There are three options for such emission reductions: (A) a net balance with potentially avoided emissions beyond the system boundary of the building; (B) the purchase of CO2 certificates issued by organisations investing in GHG emission reduction projects; or (C) negative emissions based on technical measures that extract CO2 from the atmosphere.
Emissions and emission reductions can be assessed for direct operational, direct and indirect operational and for full life-cycle-based GHG emissions of buildings. The scope of the analysis and the system boundary need to be identical for the assessment of the emissions and the emission reductions. Below are examples of questions related to the scope and system boundary for both sides (emissions and emission reductions):
In the following section, some key elements of scope and system boundary definition are described in more detail.
In the context of life-cycle-based GHG emissions of buildings and the preparation of a building-specific GHG emission balance, a few questions need to be clarified.
Life-cycle-based GHG emissions caused by buildings cannot be measured. They can be calculated using an environmental life-cycle assessment. The GHG emissions caused during the operation of buildings are calculated based on the demand of the final energy carriers and their supply chain-based GHG emission factors. These emission factors may be average or project specific and either static (representing the actual situation) or dynamic (including future developments in the energy and electricity mixes). The operational GHG emissions may also cover process-specific emissions such as leakages of refrigerants used in electric heat pumps.
The embodied GHG emissions caused during the manufacture of construction materials and building elements, construction and end of life (demolition, waste management, disposal) of the building are determined based on the quantity of materials and by taking into account building element-specific lifetimes. Average (generic) data offered by associations, public authorities or LCA database operators or specific LCA data offered by manufacturers are used (e.g.KBOB et al. 2016; Saint-Gobain ISOVER 2014; Stahlbau Zentrum Schweiz 2014). The availability of sufficient and appropriate data in view of their geographical, temporal and technological representativeness is a necessary although not a sufficient prerequisite.
The description of the object of investigation is one important prerequisite for the appropriate quantification, assessment and reduction of GHG emissions. This is important to ensure that there is neither double-counting nor exclusion. The definition includes the object of investigation itself and the system boundary. In the case of buildings: (1) the object of assessment is described and quantified based on the description of the functional equivalent (sometimes also called a functional unit and expressing the functional requirements as a basis for the reference unit and a basis for comparisons); and (2) the system boundary is defined, which allows for and requires a complete quantification of the construction works and its parts as well as the complete life-cycle, ideally structured according to stages and information modules, defined in international and European standards (e.g.CEN 2011).
The definition of the scope may have a substantial influence on the total amount of GHG emitted during the life-cycle of a building, for instance, regarding the kinds of operational energy taken into account, see above).
The quantification of only CO2 emissions alone is insufficient as some construction products, energy carriers, heating and cooling devices emit substantial amounts of other GHGs such as methane, nitrous oxides and refrigerants. It is very common to assess GHG emissions with the most recent global warming potentials (GWP 100) of the various GHGs (IPCC 2013), which represent the relative radiative forcing of a GHG compared with CO2, integrated over 100 years. When determining the GWP 100 indicator, the source of the characterisation factors used must be specified. The values published by the IPCC (2018b) are most helpful.
Although GHGs are an immediate and pressing concern, other pollutants and environmental degradation can also be included in indicators in order to identify and possibly avoid trade-offs, e.g. human health impacts caused by fine particles (Fantke et al. 2015), water stress (Boulay et al. 2018) and biodiversity damage potential (Chaudhary & Brooks 2018; Chaudhary et al. 2015). The Life Cycle Initiative, hosted by UN Environment, published two volumes of recommended life-cycle assessment indicators useful in this respect (Frischknecht & Jolliet 2016, 2019). This paper focuses on GHG emissions.
Several standards and guidelines exist and are issued by various organisations (e.g. for buildings, see RICS 2017). Most of these standards and guidelines leave room for interpretation. That is why a basis for a unified approach is being developed in the context of standardisation activities (e.g. CEN/TC 350, ISO/TC 59 and ISO/SC 17) and ongoing research projects (e.g. IEA EBC Annex 72). Topics under discussion are: (1) the assessment of biogenic carbon in the supply chain of wood and other biomass; (2) the handling of biogenic carbon content in products; (3) the assessment of GHG emissions related to land use and (direct and indirect) land-use change; (4) the handling of the export of energy produced on-site, e.g. building-integrated photovoltaics; and (5) the handling of the recycling potential at the end-of-life stage of buildings. Decisions regarding the aspects mentioned have an influence the calculation of GHG emissions and thus on the reachability of (net-) zero-emission level of buildings.
In the past, targets were typically defined as a percentage reduction over an existing baseline, often limited by caveats involving technical and economic feasibility. However, this bottom-up approach does not adequately account for overall environmental limits, e.g. ‘planetary boundaries’, and the concept of a ‘safe operating space’ of ‘spaceship earth’ (Rockström et al. 2009; Steffen et al. 2015). A planetary boundaries approach derives science-based targets (Sabag Muñoz & Gladek 2017). With regard to climate change, the target is rather straightforward: net-zero CO2 emissions need to be attained well before 2050 to comply with the 1.5°C target. This net-zero CO2 emissions target may also require substantial extraction of CO2 from the atmosphere or by the capture and storage of large amounts of biogenic CO2. ‘Climate neutral’, ‘(net-) zero carbon’ or ‘(net-) zero GHG-emission’ buildings have the potential to be in line with the Paris Agreement.
Besides these technical questions on the calculation, modelling and assessment of life-cycle-based GHG emissions of buildings, terms and definitions should be carefully selected to show differences in the (net-) zero-emission approaches and to increase transparency and credibility. The next section proposes a system of terms and definitions.
Various terms, definitions, modelling rules as well as options for balancing/compensation exist in the context of buildings. Several attempts have been made to provide an overview of zero-emission buildings and to describe latest developments. In contrast to net-zero energy systematic and comparative first systematic and analytical synopses on existing net-zero GHG-emission schemes and programmes for buildings are being published (e.g.EBC Building Energy Codes 2020). The World Green Building Council (WGBC) provides a list of the latest developments in several countries and organisations.7 An assessment of national and international guidelines, standards and rules about the environmental assessment and GHG emissions of buildings is currently ongoing within the IEA EBC Annex 72 (Frischknecht 2018).
A typology of net-zero GHG-emission approaches for buildings is introduced below. This typology serves the purpose of grouping the different approaches and thus of enhancing transparency and facilitating understanding. It is suited for the assessment of operational or life-cycle-related GHG emissions.
The emission approaches are classified here into four categories: ‘net-zero’ (approaches A–C) and ‘zero’ (approach D):
Within approaches A–C, three additional variations are distinguished and used in the illustrative example (but not described in Table 2):
|Type||Net-zero-emission approaches||Zero-emission approach|
|Name||Net-balanced approach||Economic compensation||Technical reduction||Absolute zero|
Attributes the potential benefits caused by exported energy produced on-site solely to the GHG emissions of the building
Attributes the pro rata share of GHG emissions caused by on-site energy production to the exported energy
The amount of exported energy and potential benefits caused by exported energy are reported as additional information
|Purchase of CO2 certificates covering life-cycle GHG emissions caused by the building||Investment in technical-reduction measures to reduce life-cycle-based GHG emissions caused by the building||Use of construction materials and components with zero GHG emissions (including supply chain emissions), purchase of operational energy and water with zero GHG emissions (including supply chain emissions)|
|Feasibility||Net-zero GHG emissions are within reach by minimising the energy demand and maximising the generation of renewable energies and the inclusion of potentially avoided GHG emissions due to the export/sale of energy to third parties||Net-zero GHG emissions are within reach by minimising the energy demand and maximising the on-site production of energy with (building-integrated) renewable energies combined with an economic compensation (B) or a technical reduction (C)||Net-zero GHG emissions are within reach by purchasing CO2 certificates/emission allowances and thus economically compensate for the remaining GHG emissions caused by the buildinga||Net-zero GHG emissions are within reach by purchasing technical GHG emission reductions to level off the GHG emissions caused by the buildingb
The GHG emission reductions are achieved by one of the following negative-emission technologies (NET)c or carbon dioxide removal (CDR):
|Absolute zero emissions are within reach if all production processes, including all supply chains, are based on renewable energies and free from emissions of any GHG, and if no building products emitting CO2 from carbonisation processes are used|
|Limitations||Dependent on the (continuously declining) carbon intensity of avoided electricity producing technology or mix
Avoided emissions attributed to the building need to be accounted for by the purchaser of exported energy. This measure to reach a net-zero GHG building leads to increased GHG emissions elsewhere
Double-counting of low-carbon energy production is likely to occur
|Net-zero GHG-emission buildings are reachable only with financial compensation or technical reduction||Financial compensation does not sufficiently contribute to the global net-zero emission target
The cheapest reduction potentials are likely located in emerging and developing economies. These countries may thus face high costs in future when it is their turn to reduce GHG emissions
|Achievable if permanent carbon storage is technically and economically feasible||Very difficult to achieve due to the current dependence on certain materials (float glass, cement, etc.). A viable carbon capture and storage is needed to reduce emissions from the production of these materials|
The four approaches are now described.
The ‘net-balance’ approach for the operational part or the full life-cycle includes two steps. In the first, the operational energy demand of the building as well as the energy produced on-site are determined. It should be specified which parts of the operational energy demand are included (items B6.1–B6.3, B7, B8) (Figure 1). In the case of a full life-cycle approach, the completeness of the building model should be stated (e.g.Frischknecht et al. 2019). The energy balance may be established on a yearly, monthly or even hourly basis. The scope of energy consumption as well as the granularity of the analysis will influence the share of self-consumption of energy produced on-site and to what extent the building produces more energy than it consumes during the use phase.
In a second step, the balance is assessed for which two options are available: either the potential benefits beyond the system boundary caused by exporting energy (‘avoided GHG emissions’) are attributed to the building (approach Aa ‘potentially avoided emissions’) and reported separately as additional information, or the pro rata share of GHG emissions caused by on-site energy production is attributed to the exported energy (approach Ab ‘allocation’) and no potential benefits beyond the system boundary are attributed to the building.
While a net-zero-emission building may be reached with approach Aa, it is not the case with approach Ab, unless it is combined with either approaches B or C. Approach Aa is problematic because it relies on the uncertain scenario that exported electricity avoids the average grid mix production of today. It also bears the real risk of double-counting of emission reductions with both the producer (the building) and the user (purchaser of exported energy). The amount of exported energy may be reported as additional information as requested by ISO 16475-1:2017 (Carbon metric of an existing building during use stage) (ISO 2017). In CEN/TC 350, experts are discussing whether and how the potential benefits and loads beyond the system boundary caused by exported energy could be reported in module D as additional information.
The main advantage of approach Aa is that net-zero-emission buildings are relatively easy to reach.
While some existing approaches assume the production of renewable energy on the building or the plot, other approaches allow the production of renewable energy (e.g. wind power) happening elsewhere. Marszal et al. (2010) provide an overview. Such approaches are in between net balance and economic compensation (see the next section).
The GHG emissions caused by construction, use and end of life of the building are determined. The resulting emissions are compensated (offset) in this approach by purchasing CO2-emission certificates. It is possible to compensate also for the emissions of GHG other than CO2 by such certificates. This approach offsets GHG emissions from buildings. However, it does not sufficiently contribute to the global net-zero GHG emission goal, because the building still emits GHGs (for which emission certificates are purchased). Emission certificates may have been issued for a non-increase in GHG emissions (certificates for CO2 not emitted due to investments in wind power plants avoiding investments in new coal power plants). If a certificate is issued for a real emission reduction, then CO2 is still being emitted, namely those amounts for which emission certificates are purchased. On a global level, a maximum of 50% of GHG emissions can be reduced by CO2 certificates: per 1 tonne emission reduction for which a certificate is issued, 1 tonne is still being emitted (by the entity purchasing the certificate).
The advantage of approach B is its rather straightforward implementation, given a sufficient amount of reliable and trustworthy emissions certificates available. The main disadvantage is the fact that net-zero CO2 emissions will not be reached with economic compensation only.
The framework issued by the UK Green Building Council (UK GBC 2019) recommends emission offsetting.
The GHG emissions caused by construction, use and end of life of the building are determined. Investments are made in technical-reduction measures to extract the equivalent amount of CO2 emissions from the atmosphere. Technical-reduction measures include negative-emission technologies (NET) such as ‘biological fixation’ (e.g. by afforestation), biogenic energy resources with carbon capture and storage (BECCS), or direct air capture8 with carbon separation and storage (DACCS). This approach allows one to reach net-zero-emission buildings and contributes at the same time to the global net-zero-emission goal.
The main advantage of this solution is a real and technical reduction of the concentration of CO2 in the atmosphere. Its main disadvantage is, however, that many issues surrounding these technologies are unresolved: if, when, at what costs and at which risks (of CO2 leakage or even release) such options will be available and their long-term viability. A further unknown dimension is the geopolitical aspects surrounding the deployment of such technologies and the sharing of long-term costs, responsibilities and liabilities.
The building is made of construction materials with zero-emission supply chains and end-of-life management, and using zero GHG-emission fuel and electricity in construction and use. Although (currently) not within reach, this approach would allow for real zero GHG-emission buildings and would at the same time contribute to the global net-zero GHG-emission goal.
While absolute zero on-site GHG emissions may be within reach during the operation of buildings, this is much less the case for the supply chains of operational energy demand and the supply chains of construction materials and building elements.
All approaches described may entail additional costs. This may benefit the economically privileged and penalise the disadvantaged (Klinsky & Mavrogianni 2020). However, the future climate costs of not acting now surpass by far the costs of GHG-reduction measures today (Stern 2006).
The typology summarised in Table 2 is intended to serve the following purposes:
The typology presented in Table 2 may be further detailed, in particular regarding the net-zero-emission approaches, for instance, by defining a physical perimeter within which compensation or balancing should take place (within the borders of the plot, within the district, within the country, etc.).
|Name||Variations in scope||Explanation|
|Operational on-site GHG emissions||Operational including supply chain GHG emissions||Embodied GHG emissions||Life-cycle-based GHG emissions|
|Zero × GHG emissions building||▄||▄||▄||▄||Absolute zero (Option D)|
|Net zero × GHG emissions building by economic compensation||▄||▄||▄||▄||Combined with economic compensation (Option B)|
|Net zero × GHG emissions building by technical reduction||▄||▄||▄||▄||Combined with technical reduction (Option C)|
|Net zero × GHG emissions building by credits from emissions avoided elsewhere||▄||▄||▄||▄||Including potential benefits beyond the system boundary (Option Aa)|
It is advisable to communicate the applicable scope of the assessment that underlies the net-zero GHG-emission approach as in some cases it might only cover the in situ emissions during the use phase of a building, whereas other approaches cover the full life-cycle.
The approaches and terms proposed may be combined in cases where the building assessment is, for example, including the potential benefits beyond the system boundary and the remaining emissions are economically compensated using CO2 certificates/allowances (‘net-zero-emission building by credits from emissions avoided elsewhere and economic compensation’).
The four different approaches are illustrated using fictive (but realistic) numbers. The three different variations regarding the scope of the assessment are added to approaches A–C.
The illustrative building causes 10 kg CO2-eq/m2 and /year embodied GHG emissions (Table 4). The manufacture of the photovoltaic (PV) system mounted on the building causes 2 kg CO2-eq/m2 and /year. The operation of the building causes 3 kg CO2-eq/m2 and /year direct emissions and 1 kg CO2-eq/m2 and /year indirect (supply chain) emissions. The share of exported electricity is 30%, i.e. 70% of the electricity produced with PV is self-consumed in the building. The emission intensity of the grid mix is 500 g CO2-eq/kWh and of PV electricity 50 g CO2-eq/kWh.
|PV system||kg CO2/m2a||2|
|Supply chain||kg CO2/m2a||1|
|Exported PV electricity||Share||30%|
Figure 3 shows the GHG emissions (above the x-axis) and the GHG-emission reductions (below the x-axis) separately. The potentially avoided GHG emissions caused by exported electricity (variations 1–3 in approach Aa) are fixed. Thus, it depends on the scope of the assessment whether or not net-zero GHG emissions are achieved (Aa2) or even surpassed (Aa3). Approach Ab does not include any potentially avoided emissions and net-zero GHG-emission buildings are out of reach. In approaches B and C, the amount of emission reductions is determined by the amount of GHG emissions, and thus by the definition of the scope. In approach D, no GHG are emitted and thus no GHG emission reductions are required. Approach D is hardly reachable today because GHG emissions are likely to occur in the supply chains of electricity, renewable fuels and construction materials.
The specification of targets for limiting, avoiding or compensating for GHG emissions in the life-cycle of buildings practically corresponds to a benchmark, in the sense of a limit or target value. A robust approach requires clear communication with users of the background, calculation and verification methods as well as the databases (sources and detailed information).
The structure of information to describe a benchmark is part of a new standard ISO 21678 (2020). However, the authors propose to specify the approach used when defining (net-) zero GHG-emission targets.
Claims about climate-neutral buildings based on a (net-) zero GHG-emission approach are expected to become the subject of sustainability reporting, the basis for new contracting models and part of voluntary commitments. The issues discussed in this paper will play a role in formulating future legal requirements to limit GHG emissions from buildings.9 The need exists to generate and agree upon a clear set of explanations, definitions and basic assumptions related to the terms used in policy-making, communication and marketing to re-establish and ensure and maintain acceptance, trust and credibility, including the following:
The development and application of transparent, comprehensible and science-based terms, definitions, system boundaries, calculation and verification rules is a prerequisite not only for the credibility of institutions of all kinds but also for achieving the global goals in the field of climate protection. The international project IEA EBC Annex 72 is currently working on this and similar topics. The publication of its results is expected in early 2023.
2ISO TC 59 is the International Standards Organization technical committee on ‘Buildings and Civil Engineering Works’. ISO SC 17 is the scientific committee on ‘Sustainability in Buildings and Civil Engineering Works’. See: https://www.iso.org/committee/322621.html.
3European Committee for Standardization (CEN) technical committee 350 on ‘Sustainability of Construction Works’. See: https://standards.cen.eu/dyn/www/f?p=204:7:0::::FSP_ORG_ID:481830&cs=181BD0E0E925FA84EC4B8BCCC284577F8.
4International Energy Agency (IEA) Energy in Buildings and Communities (EBC) Annex 57 ‘Evaluation of Embodied Energy and CO2e for Building Construction’. See: http://www.annex57.org/.
5IEA EBC Annex 72 ‘Assessing Life Cycle Related Environmental Impacts Caused by Buildings’. See: https://annex72.iea-ebc.org/.
6Details on operational aspects are included in an international standard (ISO 2017).
7See https://www.worldgbc.org/advancing-net-zero/what-net-zero (accessed on August 31, 2020).
8For instance, practiced by companies such as climeworks (https://climeworks.com/) (accessed on August 31, 2020).
9Some requirements were also stipulated in the Graz Declaration for Climate Protection in the Built Environment (TU Graz 2019).
The authors thank the experts in ISO/TC 59/SC 17, CEN/TC 350, IEA EBC projects Annex 57 and Annex 72, and in national harmonisation and consensus-finding processes for the inputs received during discussions and debates. They also thank the anonymous reviewers for their valuable comments and recommendations. The authors also thank Richard Lorch for his kind support during the preparation and finalisation of the contribution.
The authors have no competing interests to declare.
The paper was prepared with funding support from the Federal Ministry of Economic Affairs and Energy (BMWi) in Germany, coordinated by the project management agency PTJ (project number 03ET1550A) and the Swiss Federal Office of Energy (grant number SI/501549-01).
Boulay, A.-M., Bare, J., Benini, L., Berger, M., Lathuillière, M., Manzardo, A., Margni, M., Motoshita, M., Núñez, M., Pastor, A. V., Ridoutt, B., Oki, T., Worbe, S., & Pfister, S. (2018). The WULCA consensus characterization model for water scarcity footprints: Assessing impacts of water consumption based on available water remaining (AWARE). International Journal of Life Cycle Assessment, 23, 368–378. DOI: https://doi.org/10.1007/s11367-017-1333-8
Chaudhary, A., & Brooks, T. M. (2018). Land use intensity-specific global characterization factors to assess product biodiversity footprints. Environmental Science and Technology, 52, 5094–5104. DOI: https://doi.org/10.1021/acs.est.7b05570
Chaudhary, A., Verones, F., de Baan, L., & Hellweg, S. (2015). Quantifying land use impacts on biodiversity: Combining species–area models and vulnerability indicators. Environmental Science and Technology, 49(16), 9987–9995. DOI: https://doi.org/10.1021/acs.est.5b02507
Fantke, P., Jolliet, O., Evans, J. S., Apte, J. S., Cohen, A. J., Hänninen, O. O., Hurley, F., Jantunen, M. L., Jerrett, M., Levy, J. I., Loh, M. M., Marshall, J. D., Miller, B. G., Preiss, P., Spadaro, J. V., Tainio, M., Tuomisto, J. T., Weschler, C. J., & McKone, T. E. (2015). Health effects of fine particulate matter in life cycle impact assessment: Conclusions from the Basel Guidance Workshop. International Journal of Life Cycle Assessment, 20, 276–288. DOI: https://doi.org/10.1007/s11367-014-0822-2
Frischknecht, R. (2018). Assessing life cycle related environmental impacts caused by buildings (IEA EBC Annex 72). In Proceedings of IALCCE 2018, 6th International Symposium on Life-Cycle Civil Engineering, Ghent, Belgium (p. 157). International Association for Life-Cycle Civil Engineering (IALCCE).
Frischknecht, R., Balouktsi, M., Lützkendorf, T., Aumann, A., Birgisdottir, H., Grosse Ruse, E., Hollberg, A., Kuittinen, M., Lavagna, M., Lupišek, A., Passer, A., Peuportier, B., Ramseier, L., Röck, M., Trigaux, D., & Vancso, D. (2019). Environmental benchmarks for buildings: Needs, challenges and solutions. Paper presented at the 71st LCA Forum, Swiss Federal Institute of Technology, Zurich, Switzerland, 18 June 2019. International Journal of Life Cycle Assessment. DOI: https://doi.org/10.1007/s11367-019-01690-y
IPCC. (2018a). Summary for policymakers. In Global warming of 1.5°C. An IPCC special report on the impacts of global warming of 1.5°C above pre-industrial levels and related global greenhouse gas emission pathways, in the context of strengthening the global response to the threat of climate change, sustainable development, and efforts to eradicate poverty, ed. V. Masson-Delmotte, P. Zhai, H.-O. Pörtner, D. Roberts, J. Skea, P. R. Shukla, A. Pirani, W. Moufouma-Okia, C. Péan, R. Pidcock, S. Connors, J. B. R. Matthews, Y. Chen, X. Zhou, M. I. Gomis, E. Lonnoy, T. Maycock, M. Tignor & T. Waterfield. World Meteorological Organization (WMO) for the Intergovernmental Panel on Climate Change (IPCC). Retrieved from https://www.ipcc.ch/sr15/chapter/spm/
IPCC. (2018b). Anthropogenic and natural radiative forcing. Intergovernmental Panel on Climate Change (IPCC). https://www.ipcc.ch/site/assets/uploads/2018/02/WG1AR5_Chapter08_FINAL.pdf
ISO. (2017). ISO 16745-1: Sustainability in buildings and civil engineering works—Carbon metric of an existing building during use stage—Part 1: Calculation, reporting and communication. International Organization for Standardization (ISO).
ISO. (2020). ISO 21678: Sustainability in buildings and civil engineering works—Indicators and benchmarks—Principles, requirements and guidelines. International Organization for Standardization (ISO).
KBOB, eco-bau & IPB. (2016). KBOB-recommendation 2009/1:2016: Life cycle assessment data in construction, status as at September 2016. Koordinationskonferenz der Bau- und Liegenschaftsorgane der öffentlichen Bauherren c/o BBL Bundesamt für Bauten und Logistik. Retrieved from https://www.kbob.admin.ch/kbob/it/home/publikationen/nachhaltiges-bauen/oekobilanzdaten_baubereich.html
Klinsky, S., & Mavrogianni, A. (2020). Climate justice and the built environment. Buildings & Cities, 1(1), 412–428. DOI: https://doi.org/10.5334/bc.65
Lützkendorf, T. (2019). Application of ‘element’-method in sustainability assessment. In IOP conference series: Earth and environmental science (Vol. 290, No. 1, p. 012052). IOP Publ. DOI: https://doi.org/10.1088/1755-1315/290/1/012052
Marszal, A. J., Bourrelle, J. S., Musall, E., Heiselberg, P., Gustavsen, A., & Voss, K. (2010). Net zero energy buildings—Calculation methodologies versus national building codes. In Proceedings of the International Conference on Solar Heating, Cooling and Buildings, Graz, Austria, EuroSun 2010. DOI: https://doi.org/10.18086/eurosun.2010.06.14
Minx, J. C., Lamb, W. F., Callaghan, M. W., Fuss, S., Hilaire, J., Creutzig, F., Amann, T., Beringer, T., de Oliveira Garcia, W., Hartmann, J., Khanna, T., Lenzi, D., Luderer, G., Nemet, G. F., Rogelj, J., Smith, P., Vicente, J. L., Wilcox, J., & del Mar Zamora Dominguez, M. (2018). Negative emissions—Part 1: Research landscape and synthesis. Environmental Research Letters, 2018(13), 063001. DOI: https://doi.org/10.1088/1748-9326/aabf9b
Musall, E. (2013). The net ZEB balance concept. Net_ZEB_balance_concept.png. Retrieved from https://en.wikipedia.org/wiki/Zero-energy_building#/
RICS. (2017). Whole life carbon assessment for the built environment. RICS professional standards and guidance. The Royal Institution of Chartered Surveyors (RICS). Retrieved from https://www.rics.org/globalassets/rics-website/media/news/whole-life-carbon-assessment-for-the--built-environment-november-2017.pdf
Rockström, J., Steffen, W., Noone, K., Persson, Å., Chapin, F. S., Lambin, E. F., Lenton, T. M., Scheffer, M., Folke, C., Schellnhuber, H. J., Nykvist, B., Wit, C. A. d., Hughes, T., Leeuw, S. v. d., Rodhe, H., Sörlin, S., Snyder, P. K., Costanza, R., Svedin, U., Falkenmark, M., Karlberg, L., Corell, R. W., Fabry, V. J., Hansen, J., Walker, B., Liverman, D., Richardson, K., Crutzen, P., & Foley, J. A. (2009). A safe operating space for humanity. Nature, 462(September 24, 2009), 472–475. DOI: https://doi.org/10.1038/461472a
Steffen, W., Richardson, K., Rockström, J., Cornell, S. E., Fetzer, I., Bennett, E. M., Biggs, R., Carpenter, S. R., de Vries, W., de Wit, C. A., Folke, C., Gerten, D., Heinke, J., Mace, G. M., Persson, L. M., Ramanathan, V., Reyers, B., & Sörlin, S. (2015). Planetary boundaries: Guiding human development on a changing planet. Science, 347(6223), 736–747. DOI: https://doi.org/10.1126/science.1259855
Stern, N. (2006). Stern review: The economics of climate change. London. DOI: https://doi.org/10.1017/CBO9780511817434
TU Graz. (2019). Graz Declaration for Climate Protection in the Built Environment. Retrieved from https://www.buildingsandcities.org/insights/news/graz-declaration-built-environment.html
UN. (2015). The Paris Agreement. United Nations (UN). Retrieved from https://unfccc.int/process-and-meetings/the-paris-agreement/the-paris-agreement